Geekria Microphone Arm Compatible with Rode Mics for Creators

The product description table clamp installation process involves the following steps: 1) Place the fixed base of the fixture on the edge of the workbench, and rotate the screw to fix it. 2) Insert the cantilever into the base and turn the knob to fix it.

For the flange fixed installation, the user should put the flange mount flat on the table and fix it on the desktop by punching 3 screws. After being fixed in a position, the flange mount cannot be moved freely.

The microphone can be connected to the boom arm through 3/8 female - 5/8 male screws or 3/8 female - 1/4 male screws. The microphone flange mount is for permanent installation and can be installed anywhere on the workbench as required. This microphone flange mount is compatible with various Rode microphone models, including Podmic, NT-USB, NT1-A, NT1, Podcaster, NT2-A, K2, NT5, NT55, NT1000, Broadcaster, NT2000, and NTK.

The large-area contact table fixtures are used to increase the contact surface and improve stability. They can also be clamped to all sides of the table. The mic arm is compatible with multiple models of microphone shock mounts and most microphones, making it perfect for podcasters, streamers, YouTubers, TikTokers, content creators, and radio broadcasters.

The durable construction and articulating design of the desktop mic extension arm provide a total arm reach of 28.7 inches / 73 cm while accommodating mics weighing up to 2.5 lb / 1.13 kg. The arm can be attached to a table or desk up to 2.4 inches / 6 cm thick with the included C-clamp mount, which can swivel 360 degrees. Friction hinges hold the stand at the desired angle and allow for easy and silent positioning to achieve optimal mic placement. The arm can also attach accessories like shock mount, pop filter, pop screen, cable, webcam, and mic mount.

The package includes: 1 x Mic arm, 1 x C-clamp mount, 1 x Desktop flange mount, 1 x 3/8" to 5/8" Adapter, 1 x 3/8" to 1/4" Adapter, 4 x Cable tie, 1 x Wrench, 1 x Screw fastening tool, and 4 x 1.4" (3.5 cm) screws.

product information: